Arbonia Ascotherm KC291 Informations Techniques page 8

EN – About this manual
1. About this manual
This information applies to the Asco-
therm ® eco trench convectors KC291/KC491
that are delivered ex factory with EC cross-
flow fans and without other electrical compo-
nents (voltage transformers and closed loop
control components in particular). It includes
the technical specifications for the fans in or-
der to integrate them into an external open/
closed loop control system.
Pass the manual on to every new owner, ope-
rator, or user. Before use and before starting
any work, this manual must be read careful-
ly and understood. A basic prerequisite for
working safely is adhering to all safety and
handling instructions provided in this manual.
Apart from that, the local accident preventi-
on regulations apply. Technical specifications
subject to change!
1.2 Permitted use
Components of the Ascotherm
technology may only be used:
W
in conjunction with Ascotherm
convectors
W
for controlling the heating and/or cooling
mode of the convectors
W
in indoor areas (e.g. residential, commerci-
al, exhibition areas).
The product may only be assembled, installed,
and operated as described in this manual. All
instructions in this manual must be observed.
8
1.3 Impermissible use
Any other use is contrary to the intended
purpose and therefore not permissible. The
operator will bear sole responsibility for any
damages resulting from this, the warranty
provided by the manufacturer will be void. If
there is a damage to the product, it must no
longer be operated. Unauthorised changes
and modifications are not allowed. Factory
markings on the product may not be removed,
changed, or made illegible.
Components can not be used:
W
W
W
W
W
1.4 Applicable documents
Apart from this manual, you must also comply
with the corresponding instructions for the
components and system parts already on site
® eco control or also being supplied/designated.
®
eco trench 1.5 Disposal
Dispose of the unit in the separate collection
for electrical and electronic devices. Comply
with local regulations.
in outdoor areas
in wet rooms and wet areas
in areas with high exposure to dust
in rooms with an aggressive atmosphere
in potentially explosive areas.