Care And Cleaning - Fusion Xcelerator FX770 Manuel D'utilisation

EN

CARE AND CLEANING

The Fusion Xcelerator
that you will get many years of service from this product. Other than basic cleaning,
this unit requires no mechanical maintenance. Should it stop working or malfunction,
discontinue use.
• Wash the lids/caps, cups and blades in warm soapy water. Rinse and dry
thoroughly especially before first use.
• To remove sticky or stubborn food debris from cups or blades, fill the cup with
warm soapy water.
• Assemble the cup and blade components. Attach the assembled cup and blade
to the base unit and run until debris is free from the blade and cup. Remove blade
and cup, disassemble and rinse thoroughly with clean warm water. Carefully hand
dry avoiding finger contact with the sharp blades.
• Since the base unit should never have direct contact with any food, it rarely gets
very dirty. However, keeping it clean using a warm and soapy kitchen cloth or
non-abrasive sponge is recommended. Once cleaned, dry the base thoroughly
before storing.
20
has been engineered to last. Proper use and care will insure
™
IMPORTANT: Never immerse the base unit or power cord in
water or liquid of any kind.
NOTE: Although the unit's components, with the exception
of the power base, are top shelf dishwasher safe, we
recommend washing the components by hand. For
safety reasons, do not touch the blades directly with
your fingers.
NOTE: Before cleaning the Base Unit make certain to
unplug it from the AC outlet.
CAUTION: Never use abrasive materials or cleansers to
clean the main base or any of the parts. This can
scratch the finish causing permanent damage.