Fusion Xcelerator FX770 Manuel D'utilisation page 15

IMPORTANT: Before first use, wash parts and accessories (not the Power Base) in warm
soapy water. Rinse carefully to remove all soap residue and hand dry with a
clean towel. Avoid hand and finger contact with sharp blades.
NOTE: Fusion Xcelerator
Base, are "Top Shelf" dishwasher safe. See Care and Cleaning on page 20.
WARNING: Never immerse the Power Base in water or liquid of any kind. After
making certain it is unplugged, you may clean the outer surface of the
Power Base with a damp soapy cloth, making sure to dry it thoroughly
before plugging it back into the wall socket.
THE POWER BASE
This is the heart of the Fusion Xcelerator
23,000 RPM of chopping power to the selected blade component, guaranteeing
perfect recipe results every time. It is important not to run the Power Unit for more
than one minute during any cycle to aviod overheating and "shut off." Many
blending cycles take as few as 10 seconds for completion. Should "overheating"
occur, see page 13, bullet 4, of this manual.
THE XCELERATOR CUPS
These cup components are multi-purpose. They are used for mixing and processing
as well as serving. All three cups may be used with either of the blade components,
and all of the lids.
340 ml cup (D) is perfect for individual or smaller portions.
680 ml cup (C) accomodates larger recipes.
"Keep Cold" Travel Cup (B) has a removable bottom and thermal inner wall
construction that allows you to fill it with water and freeze it... keeps drinks ice
cold for extended periods. Perfect for "Smoothies On The Go."
XCELERATOR RINGS AND LIDS
All 3 of these components may be used with any of the cups.
Travel/Serving multi purpose lid (A) comes in handy when pouring smaller
individual portions. Its "Easy Carry Handle" makes any cup portable.
Drinking Ring (E) adds a finished edge to any cup, makes pouring or drinking
easier.
Storage Lid (F) Fits all cups... perfect for storage or travel.
XCELERATOR POWER BLADES
Blade selection is based on recipe and required processing task.
Dual Blade (G) is recommended for grinding or chopping dry ingredients such as
coffee, nuts, spices, stick cinnamon, pepper corns, flax seeds, dried peppers, etc.
Quad Blade (H) works best for liquids, soups, smoothies and pureeing, mixing and
blending. Also can be used for grinding meat, coarse chopping and grating.
NOTE: Before experimenting on your own, use recipe guide for proper use of cups, blades
and lids.
PARTS AND ACCESSORIES
system components, with the exception of the Power
™
I
™
D
B C
A E
G H
system. The Power Base delivers up to
F
EN
15