Electrical Connection - FALMEC Bellaria Mode D'emploi

Safety instructions,
UK
warnings and installation
tecHnical SaFety
Before installing the hood, check the integrity and function of
each part. Should anomalies be noted, do not proceed with
installation and contact the Dealer.
Do NOT install the device if an aesthetic defect has been detected; put
it back into its original package and contact the Dealer. No claim can
be made for aesthetic defects once it has been installed.
Do not install the device outdoors and do not expose it to weathering
(rain, wind, etc.).
Do not modify the electrical, mechanical and functional structure of
the equipment.
DO NOT use BELLARIA if the power supply cable or other components
are damaged: disconnect the device from the electrical power supply
and contact the Dealer or an authorised Servicing Department for re-
pairs.
Do not personally try to carry out repairs or replacements. Interven-
tions carried out by incompetent and unauthorised persons can cause
damage, even serious, to things and/or persons not covered by the
manufacturer's warranty.
electrical SaFety
The electrical system to which the device is connected must
comply with all standards and must be earthed in compliance
with the safety regulations in the Country of use; it must also
comply with European standards on electromagnetic compatibility.
the electrical system is compliant with law and can withstand the load
of the device (refer to the technical speciications on the identiication
nameplate mounted on the device);
Any changes to the electrical system must be carried out by a qualiied
electrician.
uSer warningS
These warnings have been drawn up for your personal safety
and those of others. You are kindly asked to read the book-
let carefully in its entirety before using the equipment or carrying out
cleaning operations.
The manufacturer declines all responsibility for any damage caused
directly, or indirectly, to persons, things and pets as a consequence of
failing to comply with the safety warnings indicated in this booklet.
It is imperative that this instructions booklet is kept together with the
equipment for any future consultation.
If the device is sold or transferred to another person, make sure that the
manual is also supplied so that the new user can be made aware of the
device's operation and relative warnings.
Insist on original spare parts.
intended uSe
The BELLARIA home air puriier is intended exclusively for treating air
in 40-50m volume environments.
3
Any use other than this is improper, it can cause damage to persons,
properties and pets and exempts the manufacturer from any liability.
The equipment can be used by children above the age of 8 and by per-
sons with reduced physical, sensory and mental abilities, or with no ex-
perience or knowledge, as long as they do so under supervision or after
having received relative instructions regarding safe use of the equip-
ment and understanding of the dangers connected to it. Children are not
to play with the equipment. Cleaning and maintenance by the user must
not be carried out by children without supervision.
inStallation
Before installing the device, read the "Safety instructions
and warnings" chapter carefully.
tecHnical FeatureS
The technical speciications are shown on a label mounted on the device:
100÷230V 50/60Hz 30W.
poSitioning
The device is free-standing and can be placed anywhere within the
home, in typical household temperature and humidity conditions.
T= 10÷35°C
H= 40÷80%
Avoid sources of heat and high humidity environments.

electrical connection

The product should be used only with the power supply unit
provided.
Before connecting the equipment to the electrical mains power supply,
check that:
the mains voltage corresponds to that speciied on the label on the pow-
er supply unit provided
To avoid overloading, do not share the same power outlet with too many
appliances.
once connected, the plug and cable do not come into contact with hot
parts having temperatures that exceed 70°C;
Do not place any connecting cable where it can be stepped on or discon-
nected.
Do not place heavy objects on it, to prevent its ends from being dam-
aged.
The socket used for connection is within reach with the device installed.
Grasp the plug and not the cables for disconnection from the socket.
The Manufacturer declines all responsibility for failure to comply with the
safety regulations.
10
Bellaria