Oster BVSTKT5970 Manuel D'instructions page 6

SELECTING THE FUNCTIONS
The kettle's default function is Boil, however you can select the desired function as
follows:
BOIL/ HEAT WATER WITH AUTOMATIC SHUT OFF
This function allows you to boil or heat water and have the unit shut off automatically
once the process is completed.
1. Plug the electric cord into the appropriate electrical outlet.
2. Choose one of the following options depending whether you would like to boil or heat
the water:
Boiling Water
Make sure the kettle icon is showing in the display. If not, press the function
button " " until the kettle icon is selected. Also, please make sure the temperature
displayed is 100º C (see figure 1).
Press the start/stop button "
the electric kettle will switch off automatically once the water boils.
Heating Water
Make sure the kettle icon is showing in the display. If not, press the function
button " " until the kettle icon is selected. Press the temperature control buttons
"+/-" to increase or decrease the temperature to your desired level. You will be able to
choose the heating temperature between 40º C and 100º C in intervals of 5 degrees
(see figure 2).
Once the desired temperature has been selected, press the start/stop button "
to start the heating process. The water will heat and the electric kettle will switch off
automatically when the water reaches the selected temperature.
3. If you wish to stop the boiling or heating process at any time, simply press the
start/stop button "
figure 1
" to start the boiling process. The water will heat and
figure 2
" again to stop it.
English - 5
"