Publicité
Les langues disponibles
Les langues disponibles
12
> Install plate locking rod set at a
depth of ⅜" from the finished wall.
15
> Position mounting frame onto
actuator.
8
70300133_Mounting_Actuator_Plate_A1
13
⅜"
> Set rod end points as to above
diagram.
> Check to ensure there are no leaks.
16
> Secure mounting frame to wall
using provided screws and washers.
> Remove plate mounting from the
2x
3,7x10x0,8
2x 3,5x25
> Position actuator hinges over rods
14
1
back of the actuator plate.
17
to secure in place.
2
Publicité
