Uline H-8533 Mode D'emploi page 3

Figure 5
Figure 6
1/4 x 15 mm
Screws
Glass
Board
PAGE 3 OF 9
ASSEMBLY CONTINUED
6. Attach marker tray to bottom of frame assembly
Marker
Tray
1/4 x 15 mm
Screws
7.
Top Cap
8. Hold both glass boards against frame and lower the
Glass
Board
1-800-295-5510
uline.com
using three 1/4 x 15 mm screws. Tighten screws
completely. (See Figure 5)
Place a glass board into marker tray's inner flanges
on each side of the board. (See Figure 6)
NOTE: Glass boards on the H-8533 (3 x 4') are
vertical. Glass boards on the H-8534 (6 x 4')
are horizontal.
top cap over frame. Insert three 1/4 x 15 mm screws.
Tighten completely. (See Figure 6)
0621 IH-8533