dji OM 4 Mode D'emploi page 6

Operation
Use the onboard buttons to control DJI OM 4. Note that DJI
Mimo is required to control the camera.
M Button
When Powered off
Press once: check battery level.
Press and hold: power on.
When Powered on
Press once: switch between photo and video
mode.
Press twice: switch between landscape and
portrait mode.
Press and hold until it beeps once: enter or exit
standby mode.
Press and hold until it beeps twice: power off.
Joystick
Move the joystick up and down to control the tilt
axis.
Move the joystick left and right to control the pan
axis.
Shutter Button
Press once: take a photo or start or stop
recording.
Press and hold: burst shooting (when in photo
mode).
Zoom Slider
Push up or down to zoom in or out.
Trigger
Press and hold: enter lock mode. Release to exit
lock mode.
Press once: start or stop ActiveTrack.
Press twice: recenter the gimbal.
Press three times: switch between front and
back cameras.
Press once, and then press and hold: enter
Sport mode. Release to exit Sport mode.
5