Controls And Indicators - IVAC P5000 Mk II Mode D'emploi

MAIN DISPLAY - For screen
information see Starting the Pump.
START Button - Press START
button to commence PCAM
operation. The GREEN light
will illuminate when the pump
is infusing.
STOP Button - Press to
stop the infusion. The
Amber light will flash to
indicate an alarm.
BATTERY & AC POWER
INDICATORS - Indicates
when the unit is running from
its internal battery or
connected to the AC power
supply with the battery being
charged.
Use + and - arrow buttons to move
cursor and increase/decrease
values shown on the display
during setup and configuration.
5001FAOPT71 ISS 8.0
PURGE Button - Press both PURGE buttons
simultaneously and hold down to purge the
extension line during set up. PURGE will only
operate when the cover is open and the key switch
is in the RUN position.
HISTORY Button -
Press HISTORY
button to display
PCAM history graphs
and event records.
ARROW Buttons - Use
ARROW buttons in
conjunction with prompts
shown in the display.
KEY SWITCH - The KEY SWITCH turns the power
ON/OFF and is used to select SET and RUN modes.
Switching from RUN to SET modes without first pressing
the STOP button will automatically stop the infusion.
Getting Started

Controls and Indicators

PRINT Button - Press
PRINT button to print
patient history. A suitable
printer must be connected.
3 / 120