Device Properties; Connecting The Power Cable - auna AMP-CH02 Mode D'emploi

DEVICE PROPERTIES

General
• Multi-mode power capability for simultaneous connection of subwoofer
and satellite speakers
• Adjustable subwoofer crossover frequency (30-250 Hz)
• High-current output device
• Adjustable RCA input level
• Basic input insulation
• Line noise suppression
• Noise reduction
• Switch-on delay
• Speaker short-circuit protection
• Gold RCA connectors and inputs
• ATC unit fuse protection
Energy supply
• Ultra-stable PWM (pulse width modulated signal)
• Energy supply (11-16 V)
• Thermal overheating protection
• Remote activation

CONNECTING THE POWER CABLE

• As this is a high-current unit, the connection of the power cable is very
important.
• Connect the red cable to the (+) terminal of your battery using the cable
with the fuse holder.
• Connect the black cable firmly to a screw or another part of the
bodywork of your car after you have removed the paint. This is
necessary for proper earthing.
• Proper wiring leads to clear sound.
EN
15