Pegasus 65717N-08104 Guide D'utilisation Et D'entretien page 6

Installation (continued)
3
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
□
Place the escutcheon (F) and the gasket (G) on
the bottom of the new faucet assembly (A).
□
Retract the hose (1) up through the faucet body,
until the hose tting is ush with the bottom of
the shank (2). Do not pull the hose tting past
the shank.
□
Insert the faucet body through the hole in the
escutcheon (F).
NOTE: If the sink is uneven, use silicone under the
gasket (G). Do not feed the hose (1) back down through the
spout until step 5.
1
2
F
G
4
Securing the faucet assembly
□
Install the rubber washer (B), and metal washer
(C) onto the threaded mounting shank.
□
Thread the nut (D) onto the mounting shank
using the basin wrench. Do not overtighten.
6
B
C
D