SNOWJOE SJ627E Manuel D'utilisation page 7

Fig. 3
Extension
cord restraint
hook
4. Secure the connection of the upper frame to the middle
frame by fastening the second set knobs and bolts on
each side (Fig. 4).
Fig. 4
Middle frame
5. Clip the 2 chute clean-out tool clips on the side of the
middle frame, and insert the chute clean-out tool in the
clips (Figs. 5 - 6).
Fig. 5
Fig. 6
Upper frame
6. Clip on the 2 cable clips on the frame, and insert the cable
Fig. 7
Cable clips
Upper
frame
Knob +
T-bolt
Cable
Discharge Chute Assembly
1. Loosen the knob to lift the chute deflector (Fig. 8).
Fig. 8
Chute clean-out
tool clips
Chute deflector
2. Secure the chute deflector by locking the deflector knob
7
inside of the cable clips (Fig. 7).
(Fig. 9).
Chute clean-out
tool
Deflector knob