Télécharger Imprimer la page

HAEGER Baltimore Mode D'emploi page 7

Grill à contact

Publicité

Les langues disponibles

Les langues disponibles

To remove grill plates
1. Open the unit to the full, flat position, if it is already not in the position.
2. Press down on the single metal clip at the front of the unit; there is one for
the top plate and one for the bottom plate.
3. Lift the plate carefully at the front and pull away from the two metal clips
at the back of the unit, at the hinge area.
4. Carefully remove and set aside.
Housing
Clean the housing after use with a slightly damp cloth.
Technical Data
Model: .............................. GR-190.008A
Power supply:................... 220-240V~, 50-60 Hz
Power consumption:....... 1900W
Protection class: .............. Ι
Conformity
This device has been tested according to all relevant current CE
guidelines,
2004/108/CE, and has been constructed in accordance with the
latest safety regulations.
Environment
Please consider our environment
Do not dispose of the appliance in your normal domestic waste. This
product is subject to the European guideline 2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your
community waste facility. Observe the currently applicable regulations. In case
of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally responsible manner.
When you wish to dispose of the appliance, dispose it in an environmentally
friendly way (e.g. recycling plant).
Instructions for use
such
as
electromagnetic
English
compatibility
Directive
5

Publicité

loading

Ce manuel est également adapté pour:

Gr-190.008a