Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Install the device on a plane surface. The Police Beacon features built-in magnets.
Connect the Police Beacon to the cigarette lighter with the plug. The lamp begins to burn and the reflector
starts rotating.
With the POWER-switch, you can switch the siren on and off.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the lamp. Maintenance and service operations are
only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Article:
Power supply:
Power consumption:
Rotation-speed:
Dimensions (LxWxH):
Maximum ambient temperature t
Maximum housing temperature t
Min. distance from flammable surfaces:
Min. distance to lighted object:
Weight:
Fitting lamp:
Please note: Every information is subject to change without prior notice. 07.01.2010 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
B
50603510 - 50603536
12 V DC
ca. 15 W
approx. 120 RPM
125 x 125 x 150 mm
45° C
80° C
0.5 m
0.5 m
0.5 kg
12 V / 21 W bayonet
11/19
50603511,
50603515
with siren
12 V DC
ca. 15 W
approx. 120 RPM
125 x 125 x 150 mm
45° C
80° C
0.5 m
0.5 m
0.6 kg
12 V / 21 W bayonet
00051158.DOC, Version 1.2
Publicité
Table des Matières
