Fan Operation Instructions; Balancing Your Fan - KLASS Fan HELIX Manuel D'utilisation

FAN OPERATION INSTRUCTIONS

WARNING! If the fan is not going to be used for more than 3 days,
make sure the switch is in the off position.
REMOTE CONTROL
This ceiling fan is operated by remote control and has the following functions:
- Natural Wind
- Speeds
- Timer / WiFi
- Light
- Light color selection
- Dimmer
- Temperature
- Memory function (fan and light)
Please check the operating instructions of the remote control
for detailed explanation of the functions available on your ceiling
fan model.

BALANCING YOUR FAN

The correct balancing of the fan requires an equal weight spread on equal places
on the blades.
There are four points to check:
1. The blades must be at the same height.
2. The blades must be at the same distance from each other.
3. The blades must be the same length relative to the engine.
4. Blades weight.
1 Blades height
Measure the distance between the blades and the ceiling. To do this, choose a
marker at the end of the blade, and measure the distance between the blade and
the ceiling.
All blades must be at the same distance.
If this is not the case, there can be several possible reasons for this:
- A washer might be missing.
- The blade is poorly installed or poorly tightened.
- The fan is poorly placed in the mounting plate; the ball is not in the groove.
- Fixing the rod at the coupler is not done in the right way, and causes the fan not
to be vertical.
21