Escali SLR200 Mode D'emploi page 2

Thank you for choosing the Escali Solar Bathroom
Scale. This precision state-of-the-art measuring instrument
is most accurate when weighing on a flat hard surface. This
scale will not function correctly on carpet. As the electronic
sensors are sensitive, avoid dropping, or jarring the scale,
and store where it will be protected from impact.
OPERATING INSTRUCTIONS
1. Select your desired mode of display by pressing the
UNIT button located on the base of the scale (lb or kg).
2. Place the scale on a solid, and flat surface.
3. To activate, simply stand directly onto the scale
platform.
4. The scale will turn off automatically when finished.
HOW TO CHARGE YOUR SCALE
Set your scale out in an area with maximum lighting. A "sun
icon" will be displayed blinking when the scale is charging
using the solar panel. For faster charging, plug the USB
end of your charge cord into a 5 watt charge block (not in-
cluded), and plug the USB-C end (smaller end) of the cord
into the front side of the scale to start charging. A battery
icon will start flashing when charging has started.
PROPER USE & CARE
Use and stow the scale at room temperature.
•
Use on a flat, level, and stable surface.
•
This scale is an instrument of precision. Do not submit
•
the scale to shaking, excessive vibration, or other rough
treatment.
The display may be affected by electromagnetic disturb-
•
ances such as radios, microwaves, or cell phones. If
such disturbances occur, remove the source of the dis-
turbance, and restart the scale.
2