VAN 'N BIKE 20220714 Manuel D'utilisation page 14

Bijlage 1 Gebruikers- & Montagehandleiding Van 'n Bike All-in One voor Fiat Ducato, Citroën Jumper, Peugeot Boxer, Opel
4. FOLDING OPEN AND CLOSED OF THE ALL-IN-ONE BIKE CARRIER:
To fold open the All-in-One bike carrier and therefore prepare it for use, pull the lock pin to the left
that can be found on the left side of the bike carrier. Next, fold down the carrier frame.
To fold away the All-in-One bike carrier, proceed in reverse order.
Push the carrier frame up until you hear a "CLICK" and check whether it is locked in place.
5. PREPARING THE ALL-IN-ONE BIKE CARRIER READY FOR USE:
The short and long spacers must be positioned when the All-in-One has bikes loaded on it. If the All-
in-One bike carrier is unloaded and/or folded closed, the spacers must be removed.
Position the supplied spacers on the brackets of the Van 'n Bike bike carrier rack.
The short spacer is intended to fasten your first bike and the long spacer is intended to fasten your
second bike.
If you are installing these spacers for the first time, you must remove the rubber ring from the
mounting bracket.
versie 20220714
Movano
14