Operation; Operation Principle And Description - Domus DTA-45 Mode D'emploi

4. OPERATION

4.1.

Operation principle and description:

The machine dries the fibres passing hot air through the textile fibres. This air drags the humidity
and sends it to the outside.
Steps for correct drying:

Choose the same type of fibre. Do not mix different types of fibres in a drying
cycle.

Load the dryer.

Open the power supplies to the machine.

In the case of an analogue machine:

Or in the microprocessor version:

Push the START cycle button.

Remove the load at the end of the cycle.
!!! WARNING. REMOVING THE LOAD WITHOUT CARRYING OUT THE COOL-DOWN
(PROGRESSIVE COOLING) MAY CAUSE BURNS AND DAMAGE THE APPLIANCE!!!
o Choose the drying duration using the timer.
o Choose the right temperature using the thermostat.
o Choose the drying programme using the microprocessor where all
the parameters for an optimum drying appear. (digital version)
79