Injector Replacement - Domus DTA-45 Mode D'emploi

3.5.

Injector replacement.

If the appliance is installed in a country where changing the diameter of the injectors were
necessary or installing the appliance to operate with another type of approved gas were
necessary, call the technical service to make the change.
Please follow the indications listed below to change the power supply from one gas group to
another.
PROCEDURE:
All dryers have a gas inlet at 3/4". Never connect a tube with a smaller diameter.
VALVE FOR DTA/DTP-45/60
A
70
NECESSARY TOOLS
Wrench no. 13
Pressure gauge
Flat screwdriver
Spare injector (you will find it in the
HANGING BAG near the valve).
C
B
HANGING BAG
VALVE FOR DTA/DTP-80
C
A
B