Cleaning - Wella PRO STRAIGHT Mode D'emploi

PS color.book Seite 40 Dienstag, 20. April 2010 6:27 18
5. Starting at the back of the neck, separate strands about 1 cm
thick. (The thinner the strand, the greater the straightening
effect.)
6. Place the root zone of a strand between the heating plates.
Pro-Straight Color
7. Now slide the
hair strand to the end. Never stay longer than 2 seconds in one
place.
8. Repeat steps 5. to 7. with the remaining strands.
9. Switch off the appliance with the On/Off switch
to cool.
10. Pull out the mains plug once you have finished the treatment
and the appliance has cooled down.
11. To fix the hairstyle, apply Wellastrate Neutralizing Emulsion
strand by strand. After the exposure time, rinse the hair
thoroughly.
12. Then shampoo the hair with a haircare product from the
Lifetex or SP range and rinse again thoroughly.
13. Finish by applying Wellastrate Straight Saver evenly to the
damp hair, then rinse out after 3 minutes.
40
All manuals and user guides at all-guides.com

7 Cleaning

To ensure perfect functioning and full performance from your
Straight Color
or aggressive cleaners or abrasive scourers.
steadily from the root of the
Important: Before cleaning the appliance, always pull out the
mains plug. Allow the appliance to cool down before cleaning it.
Cleaning the appliance
From time to time, wipe all parts of the appliance with a slightly
and allow it moistened cloth, then rub dry.
, clean the appliance regularly. Do not use flammable
Pro-