REV Ritter WC624HS Mode D'emploi page 5

DE
Eine mehrsprachige Version dieser Anleitung finden Sie unter
www.rev.de
. Alternativ können Sie auch dem nebenstehenden
QR-Code folgen.
GB
You can find a multilingual version of this manual at
Alternatively, you can also follow the QR-code below.
FR
Une version multilingue de ce manuel vous trouverez sous
www.rev.de
. Alternativement, vous pouvez suivre le code QR
adjacent.
ES
Una versión multilingüe de este manual se pueden encontrar bajo
www.rev.de
. Como alternativa, se puede seguir el Código QR
adyacente.
SI
Na voljo je večjezična različica tega priročnika www.rev.de. Lahko pa
vidite tudi sosednjo Sledite QR kodi.
www.rev.de
.
GB
WIRELESS CHIME WITH BELL BUTTON
General information
Please thoroughly read the following operating instructions before placing the device
into service and keep for future reference. The bell button is suitable for operation in
protected outdoor areas and not in harsh environments. The wireless chime is intended
for installation in dry indoor areas (IP20).
Installation may only be carried out by a qualified electrician!
Scope of delivery:
1x Bell button
1x Wireless chime
2x Alternative cover for radio bell
1x Battery: 3V CR2032 (for bell push button)
1x Mounting material
1x Operating instructions
Notes
• The wireless chime is only designed for use with the appropriate batteries.
• This wireless chime set consists of a transmitter and a receiver.
• This wireless chime set offers you the possibility to set up a bell system without wiring. It can also
be used to supplement an existing bell system.
• The flashing light makes the wireless chime ideal for use in noisy environments. The three
coloured flash covers (transparent, blue and orange) included in the delivery allow you to
customize the receiver's appearance.
• Using the paging function, the wireless chime set can be ideally used as a neighbourhood call or
as a call for help for non-mobile persons.
Technical Data
Type Wireless Chime (receiver): WC624HS
Type Bell Button (transmitter): WB057
Range (free field): approx. 150m
Volume: 85dB
Frequency: 433.92MHz
Frequency band:: 433,05 - 434,79MHz
Max. transmission power: <10mW
Dimensions: Receiver: 158 x 115 x 48mm
Transmitter: 98 x 34 x 24mm
Battery: Receiver: 3x 1.5V LR14 Baby C (not included in delivery)
Transmitter: 1x 3V CR2032 (included in delivery)
Degree of protection: Receiver: IP20 (for dry indoor use only)
Transmitter: protected outdoor area
9