Publicité
Les langues disponibles
Les langues disponibles
(Outdoor) temperature
•
After inserting the batteries, the display section of altitude begins to fl ash. Use the + and
- buttons to enter the altitude of your location (if known). Press HISTORY to continue.
•
The weather symbol now fl ashes. Use the +/- buttons to select the weather symbol that
resembles the actual weather the most. Press HISTORY again.
•
Next step is selecting the displayed unit for air pressure. (+/- : select. HISTORY: confi rm)
•
Now, the indoor unit starts to connect to the outdoor unit. This can take up to 3 minutes.
On successful connection, the valules from the outdoor unit are displayed on the indoor
unit.
•
If the connection attempt fails, press and hold CHANNEL for 3 seconds to enforce another
connection attempt.
•
The (automatic) reception of the DCF signal (radio clock signal on a carrier frequency of
18
Outdoor Unit
1
RF Symbol
2
Channel
3
Setup and Use
4
(Outdoor) humidity
A
CH (channel selection)
B
°C/°F
Publicité
