Necessary Settings before Use
MENU
Set Lever
Be sure to confi gure the following three
settings before use.
Charging the Battery Pack
1
Set the power/mode switch to OFF.
Slide while pressing down the lock button.
Required charging / recording time (approx.)
The values within ( ) are the times when the LED light is on.
Battery pack
BN-VF808U
(Provided)
BN-VF815U
BN-VF823U
12
Access/Charge Lamp
Power/Mode Switch
MODE
ON
OFF (CHARGE)
Charging time
1 hr. 30 min.
2 hr. 40 min.
3 hr. 50 min.
2
Attach the battery pack.
Slide the battery pack down until it locks
in place.
Bottom of the Camera
3
Connect the AC adapter.
Open the cover.
•
adapter using the Everio dock connector.
(
pg. 6)
•
The access/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera.
Recording time
GZ-MG255
1 hr. 30 min.
1 hr. 15 min.
(1 hr. 25 min.)
2 hr. 35 min.
(2 hr. 55 min.)
4 hr. 35 min.
3 hr. 50 min.
(4 hr. 20 min.)
DC Connector
AC Adapter
To AC Outlet
(110V to 240V)
You can also connect the AC
GZ-MG155
GZ-MG130
1 hr. 35 min.
(1 hr. 30 min.)
3 hr. 5 min.
3 hr. 15 min.
(3 hr. 5 min.)
4 hr. 55 min.
(4 hr. 35 min.)
BATT.