PNI PMR R11V Manuel Utilisateur page 12

7. INSTALLING ACCESORIES:
Installing the battery
Match the two grooves of the battery pack with the corresponding guides on the back of
the transceiver then slide it. After that press the upper of the battery pack until a clicik
sounds. (Img 1)
To remove the battery pack, turn off power and puii back on the release latch and slide the
pack away from the transceiver. (Img 2)
Img 1
Installing the antenna:
Screw the antenna into the connector on the top of the transceiver by holding the
antenna at its base and tuming it clockwise until secure. (Img 3)
Tuming or spiraling the antenna counterclockwise to ramove the antenna. (Img 4)
Img 3
Img 2
11
Img 4