Giatsu GIA-ATS-O-300VAW Manuel De L'utilisateur Et D'installation page 66

3. And buttons
These are the multi-purpose buttons. They are used for the temp setting, parameter setting,
-
parameter checking, clock adjustment and adjustment of the timer.
During running status, press
-
Press these buttons when the unit is on clock setting status, the hour(s) and the minute(s) of
-
the clock time can be adjusted.
Press these buttons when the unit is on timer setting status, the hour(s) and the minute(s) of
-
the timer 'ON'/'OFF' can be adjusted.
Press and
-
Press and
-
unlocked.
4． button
Clock setting:
- After power on, short press
"88:88" flash together;
- Short press button to switch hour/minute setting, press the
exact hour(s) and minute(s);
- Press button again to confirm and exit.
Timer setting:
- After power on, long press
on icon and hour icon "88:" flash together;
- Press the and
- Press button to transfer to minute setting, minute icon ":88" flash, press the
buttons to set the exact minute(s).
- Press button again to transfer to timer off setting, the timer off icon
flash together.
- Press the and
- Press button to transfer to minute setting, minute icon ":88" flash, press the
buttons to set the exact minute(s).
- Press button again to save and exit the timer setting interface.
Press button to cancel the timer settings during the timer 'ON' (or timer 'OFF') programming.
or button to adjust the setting temperature directly.
buttons at the same time and hold for 5 seconds, the buttons are locked.
buttons at the same time and hold for 5 seconds again, the buttons are
button to entry the clock setting interface, hour and minute icons
button for 5 seconds to entry the timer setting interface, the timer
buttons to set the exact hour(s).
buttons to set the exact hour(s).
62
and buttons to set the
and
and hour icon "88:"
and