Zodiac Security iMago 559578474 Mode D'emploi page 25

MOuNT ON THE wALL
Notice: the WIfI antenna should be installed inside the house to have better
signal.
Please confirm the correct WIFI setting and insure the position with good WIFI
signal before mounting on the wall. Otherwise, it needs to relocate the router
or the antenna direction to receive the good WIFI signal. If the WIFI signal is
still not strong enough, please add the WIFI repeater or use the network cable.
Make a mounting hole similar size as the back housing of the device. Drill a hole
for the wires to go through the wall.
All manuals and user guides at all-guides.com
Step 1:
Drill a hole for the wires to go
through the wall.
Step 2:
Fix the back housing on the wall
with two screws.
Step 3:
Lead the wires through the hole in
the wall, and put the device into the
back housing. Tighten the screw in
the bottom.
Step 4:
Locate the antenna clip on the
wall with screws.