Replacing Batteries - Honeywell Home VisionPRO Serie Mode D'emploi

Installer options
Installer options require a password and
should only be changed by a qualified
technician.
To prevent unintended changes or
damage to your equipment, do not
change these options yourself.
Replacing thermostat batteries
Install fresh batteries when the
REPLACE BATTERIES warning begins
flashing. The warning flashes about 60
days before batteries are depleted.
Even if the warning does not appear, it
is recommended to replace batteries
once a year, or before leaving home for
more than a month.
Press the release button on top of the
thermostat to remove it from the wall
plate.
Some versions of this
thermostat don't have a button on the
top.
In that case, grip the thermostat along
the top and bottom and pull it straight
off the wallplate.
There is also a
CR2032 coin cell battery
located on the back of the thermostat.
69-2761EFS—09
Button
Thermostat
16
Installer Options
Enter password
0 0 0 0
Replace Batteries
Press HERE for info
Wallplate
M34071
MCR34100
MCR33976
MCR33977
MCR34144
Thermostat
(back view)