Honeywell Home VisionPRO Serie Mode D'emploi page 14

Adjusting dehumidification settings: commercial use
This feature can control a dehumidifier
or use your air conditioner to reduce
humidity.
1 Touch MENU and select Dehumidification.
2 Select Auto.
3 Touch or
s t
4 Touch Done to save your settings. Touch
Cancel to ignore changes.
If your air conditioner is used to control
humidity, the thermostat may use the
following methods to maintain humidity:
• Cool from 1° to 5° F lower than your
temperature setting.
• Run cooling for the minimum "on"
time to reduce humidity.
• Run cooling and heating at the same
time to reduce humidity without
lowering the temperature.
Adjusting ventilation settings
1 Touch MENU, and select Ventilation.
2 Select Mode, Temporary
then select appropriate options. (For
options, see next page.)
3 Touch Done to save your settings.
Touch Cancel to ignore changes.
69-2761EFS—09
to select humidity level.
Boost, or Lockout,
12
Dehumidification
Equipment Status
Dehumidification
Off Auto
Ventilation
Equipment Status
Mode
Temporary Boost
MCR34100
MCR34130
MCR34131
MCR34100
MCR34132
MCR34133
MCR34134