Klarstein BOTELLA CURA Mode D'emploi page 21

NOTE: If the device is unplugged, the power is cut, or the device has been turned
off Wait 3 to 5 minutes before restarting the device. If you try to start it before this
time, it will not start. If you are using the device for the first time or after it has been
switched off for a long time, the display may show a deviation between the selected
temperature and the displayed temperature. This is normal and is because the device
must first cool down. As soon as the device runs for a few hours, the temperature will
normalize.
Hints on Storage
Bottles can differ in size and dimensions. The actual number of bottles that you can store
may vary.
To distribute the bottles optimally on the shelves:
EN
21