Comelit PLANUX MEMO VIDEO Mode D'emploi page 45

ADVANCED
DESCRIPTION OF ADDRESSES MENU
Sat 05/09/09 16:07
Simplebus code Simplebus code
Monitor
1 Menu for setting the bracket code.
2 Menu for setting a monitor as main / secondary.
SETTING THE BRACKET CODE
Each bracket in the system is identified by its own code;
this code should be a number between 1 and 240.
Access the menu Setup > Advanced > Addresses >
Code. Enter the bracket code and press the
confirm.
Sat 05/09/09 16:07
Number
1 2 3
9 0
4 5
6 7 8
C
If the SD card is not inserted, the following message will
appear:
1
1
2
9
SETTING A MONITOR AS
MAIN / SECONDARY
Access the menu Setup > Advanced > Addresses >
Monitor.
icon to
Select the setting by pressing the icon to the right of it.
Observe the limits specified in the installation
diagrams on the technical sheet FT/SBC/22
45
Sat 05/09/09 16:07
1
SD card error,
2 3 4 5
6
parameter saved in flash
0
Sat 05/09/09 16:07
Main Main
Main (multi)
Secondary
7 8
C