Cleaning And Care - Burg BCA60ZKB-R Instructions

CLEANING AND CARE

Cookware with rough finishes should
not be used since these can scratch
the glass ceramic surface. The bottom
of quality cookware should be as thick
and flat as possible. Before use, make
sure that the bottom of the cookware is
clean and dry.
Always place the cookware on the cook-
ing zone before switching the cooking
zone on. If possible, always place the
lids on the cookware. Bottom of cook-
wares must not be smaller or larger
than the cooking zones, they should be
at the proper size as indicated below to
avoid wasting energy.
CORRECT
FALSE
Before cleaning the hob, first remove
the plug from the electrical supply
socket. Then ensure that there is no re-
sidual heat stored in the appliance. Vit-
roceramic glass is very resistant to high
temperature and overheating. If there
is residual heat stored in the appliance,
´H` will flash on the heater display. In
order to avoid burns, let the appliance
cool down.
Remove all spilt food and fat using a
window scraper. Then wipe the hob with
a suitable cleaning detergent liquid and
a clean damp cloth. Wipe the appliance
down using a clean dry cloth.
If aluminium foil or plastic items acci-
dentally melt on the hob surface, they
should be immediately removed from
the hot cooking area with a scraper.
This will avoid any possible damage to
the surface. This also applies to sugar
or food containing sugar that may spill
on the hob.
If any other food melts on the hob sur-
face, remove it once the appliance has
cooled down. Use glass ceramic or
stainless steel cleaner when cleaning
the surface.
Do not use a dishcloth or abrasive
sponge to clean the vitroceramic sur-
face. These materials may damage the
FALSE
surface.
Do not use chemical detergents, sprays
or spot removers on the vitroceramic
surface. These materials may start a
fire or cause the vitroceramic colour to
FALSE
fade. Clean with water and liquid dish-
washing detergent.
EN -16-