face is cracked, switch
off the appliance to
avoid the possibility of
electric shock.
• For hobs incorporat-
ing a lid, any spillage
should be removed
from the lid before
opening. Also, the hob
surface should be al-
lowed to cool before
closing the lid.
• This appliance is not
intended to be oper-
ated using an external
timer or a separate re-
mote-control system.
• Do not use harsh
abrasive cleaners or
sharp metal scrapers
to clean the oven door
glass and other surface
since they can scratch
the surface, which may
result in shattering the
glass or damage to the
surface.
• Do not use steam
cleaners for cleaning
the appliance.
• Your appliance has been produced
in compliance with all applicable
local and international standards
and regulations.
• Maintenance and repair work must
be carried out only by authorised
service technicians. Installation
and repair work that is carried out
by unauthorised technicians may
endanger you. It is dangerous to
alter or modify the specifications
of the appliance in any way.
• Prior to installation, ensure that
the local distribution conditions
(nature of the gas and gas pres-
sure or electricity voltage and
frequency) and the appliance re-
quirements are compatible. The
requirements for this appliance
are stated on the label.
• CAUTION: This appliance is de-
signed only for cooking food and
is intended for indoor domestic
household use only and should
not be used for any other purpose
or in any other application, such as
for non-domestic use or in a com-
mercial environment or for heating
rooms.
• All possible security measures
have been taken to ensure your
safety. Since the glass could
break, you should be careful while
cleaning to avoid scratching it.
Avoid hitting or knocking on the
glass with accessories.
• Ensure that the supply cord is not
wedged during the installation.
If the supply cord is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
EN -5-