Yealink T54W Mode D'emploi page 22

Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1.
Press or the
2.
Enter the number you want to transfer to.
3.
Press or the
Semi-Attended Transfer
1.
Press or the
2. Enter the number you want to transfer to, and then press Send.
3.
Press or the
Attended Transfer
1.
Press or the
2. Enter the number you want to transfer to, and then press Send.
3.
Press or the
Call Forward
To enable call forward:
Press the Menu soft key when the phone is idle, and then select Features
1.
2.
Select the desired forward type:
Always Forward--- Incoming calls are forwarded unconditionally.
Busy Forward---- Incoming calls are forwarded when the phone is busy.
No Answer Forward---- Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For No Answer Forward, press
desired ring time to wait before forwarding from the After Ring Time field.
4. Press the Save soft key to accept the change.
Call Conference
1. Conference
Press the
2.
Enter the number of the second party, and then press the
3. Conference
Press the
the conference.
4. EndCall
Press the
You can split the conference call into two individual calls by pressing the Split soft key.
Speed Dial
To configure a speed dial key:
1. Menu
Press the
2.
Select the desired DSS key, and then press the
3. Speed Dial from the
Select
Label
label in the
4. Press the Save soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
Transfer
soft key during an active call. The call is placed on hold.
Transfer
soft key.
Transfer
soft key during an active call. The call is placed on hold.
Transfer
soft key when you hear the ring-back tone.
Transfer
soft key during an active call. The call is placed on hold.
Transfer
soft key when the second party answers.
soft key during an active call. The call is placed on hold.
soft key again when the second party answers. All parties are now joined in
soft key to disconnect all parties.
soft key when the phone is idle, and then select
Type
field, select the desired line from the
field and then enter the number in the
Send
soft key.
Features
Enter
soft key.
Value
field.
Call Forward.
or to select the
Dsskey.
Account ID
field, enter a
4