Fostex HP-V8 Mode D'emploi page 5

Connections
• Turn the power OFF before making connections.
• Set the VOLUME knob to minimum level when you turn the unit ON after completing all connections.
1
Connecting an audio device
Connect an audio device to the ANALOG IN terminals on the rear panel of the unit.
2
Connecting headphones
Connect headphones to one of the PHONES terminals.
Headphones
Balanced terminal
Pin confi guration of the PHONES BALANCED terminal (on the unit)
Use this terminal to connect headphones with an impedance between 16 to
600 Ω.
The four-pin balanced output terminal outputs the signals shown in the fi gure on
the right.
3
Connecting to a wall outlet
Use the supplied power cord to connect the AC IN terminal to a wall outlet.
Audio equipment or similar device
RCA cable
Headphones
Unbalanced terminal
L ch COLD
R ch HOT
L ch HOT
R ch COLD
Wall outlet
5