Renkforce Raspberry Pi Mode D'emploi page 4

PC or MAC:
• You can also operate the converter board with a PC or MAC.
• In principle, installation and operation with a PC or MAC is the same as with the
Raspberry Pi .
®
Please observe the special safety instructions in these operating instruc-
tions when installing the converter board in a computer.
Since the screw set is only intended for attachment to a Raspberry Pi
especially sure that the converter does not cause a short-circuit in this case
(e.g. through contact with the PC housing).
When using the 5-pin connector (USB_P), also observe the operating in-
structions of your computer or main board for the correct allocation.
Disposal
Electrical and electronic equipment do not belong in the regular household
waste.
Dispose of the waste product in accordance with the applicable legal regu-
lations.
Technical data
Power supply ....................................... via micro USB 2.0 connector (USB_M), 5-pin con-
Operating voltage................................5 V/DC
Supported operating systems ........... Windows
Connectors ........................................... micro USB 2.0 connector; mSATA port; 5-pin USB
Supported standards ..........................USB 2.0; SATA III, SATA II, SATA I, max. 6.0 Gbit
Supported devices .............................mSATA-SSD
Dimensions (L x W x H) ......................66 x 56 x 12 mm
Weight ...................................................18 g (only the board)
Operating conditions ..........................5 °C to +50 °C; 20% to 80% relative humidity
Storage conditions..............................-25 °C to +70 °C; 20% to 80% relative humidity
nector (USB_P) or via the external 2-pin connec-
tor (PWR)
XP from SP1 (only 32 bit), Windows
®
Vista , Windows 7, Windows 8; Windows
™ ® ®
(32 and 64 bit); Windows RT; MacOS, Linux
®
connector; external 2-pin connector for power
supply
, make
®
8.1
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.