PNI SP1000W Manuel Utilisateur page 4

Safety precaution
We recommend that you read this manual carefully before using the product,
in order to avoid personal injury and product damage.
Symbols description
Safety sign Antistatic sign Danger, electric shock
The inverter generates high temperatures during usage.
Carefully read the installation and operating instructions to avoid personal
injury or damage to the equipment.
Warning: We do not take responsibility for non-compliance with safety
measures.
Batteries of different sizes and from different manufacturers may have
different voltage. Make sure that the inverter voltage corresponds to the
battery voltage. Contact the seller for more details. Any change in the
configuration or structure of the system may affect its proper functioning.
Danger High Voltage!
Touching the inverter in a humid or wet object (or hands) can put you in a
dangerous situation.
1. Do not open the product's housing under any circumstances. The input and
output of the inverter presents a high voltage danger. Opening the inverter
and touching the internal components can put you in a dangerous situation.
2. Before maintenance, you must completely disconnect the power supply of
the inverter. It is recommended that you check both the input and output of
the inverter with a voltmeter to ensure that it is disconnected properly.
3. Even if the power is completely disconnected, residual energy may remain
in the inverter. Leave the inverter disconnected for 10 minutes to ensure that
the system is completely discharged.
4. Keep the inverter packaged before installation and use.
5. Do not manipulate the inverter in the presence of electrical conductors:
User manual 4