PNI AHD36 Manuel Utilisateur page 2

EN
TECHNICAL SPECIFICATIONS:
Resolution
Electronic shutter
Video output
Video frame rate
Minimum illumination
Led
IR distance
Lens
Power supply
Working temperature
Waterproof class
Case material
CONNECTIONS:
WARNING: This camera is intended for use in a video surveillance system. The DVR must support the AHD format. The
camera does not work in stand alone mode.
TROUBLESHOOTING:
1. No picture after powering the camera
- check if the power voltage is stable and if the connection was done properly respecting the polarity
- check the connection to the DVR or monitor
2. The image waves
- check if the power voltage is stable
- check the monitor and other peripheral equipments
3. The background image changes continuously
- the fluorescent lamp's electromagnetic field causes color roll. This is normal phenomenon of the cameras.
- reduce the number of fluorescent lamps or increase the distance between the camera and the fluorescent lamps.
4. The image is unstable
- check if the power voltage is stable
- check all connections
VIDEO SURVEILLANCE CAMERA PNI AHD36 1080P
- technical specifications and installation instructions -
Video output
Power voltage: 12V
1920 x 1080px
1/50s~1/100,000s
1 x BNC
PAL: 25fps@1080P
Color: 0.1 Lux (F1.2, AGC ON), 0 Lux (IR LED ON at night)
24
up to 30 m
3.6 mm
12V / 1A (Feeder not included)
-26°C~+60°C
IP66
metal
Note: When installing, avoid contacting the metal case with
other metal surfaces
DVR PNI House H808
Power supply PNI ST20A
2
Monitor