PNI L1200W Manuel Utilisateur page 6

EN
CHAPTER 2 INVERTER INSTALLING
Check the box contents
Please check things following after open the package:
Check the inverter outside if has any damaged. If there is any damaged of
machine, please contact common carrier immediately.
Check if the standard accessories are complete. If you find out any missign
accessory or wrong model please contact your supplier immediately.
Installation environment
Keep inverters in well ventilated places. Keep inverters away from water,
overheat, explosives, direct sunlight, volatile gas and over salinity.
Caution
The operating temperature range of inverter is -26•80˚C. Do not overload the
inverter, and it's not recomended to use over 40˚C. If the inverter temperature is
over 40˚C, reduce consumption with 10% for every 1˚C over 40.
The best operating temeperature range for the battery is -20˚C•30˚C. If the
temperature is over 30˚C, battery life span will drop. Under 20˚C the electric
storing time will drop.
Safety using distance
Inverter must pe mounted at least 60mm from the front and back panel to
anything nearby. Please do not cover two panel sides of inverter to avoid
overheat and reduce life span.
Electric cable connection
Caution
Please make sure inverter power button is off before connecting the cable. Do
not make wrong connection of polarity, or would cause inverter short circuit.
Please do as following sequential process when you connect inverter cable:
1. Turn the power button to "OFF".
2. Connect direct current input cable to the polarity of battery.
3. Make sure the plugs of inverter and battery are tightly connected or would
cause cable overheat.
6 User manual PNI L1200W