PNI Escort C100 Manuel Utilisateur page 3

INSTALLATION INSTRUCTIONS
1. Take out the license plate.
3. Tighten the screws
ASSEMBLY SCHEME
Monitor
GND Rear power
TECHNICAL SPECIFICATIONS
Chipset
Resolution
Minimum illumination
Sensitivity
Video output
Waterproof
Functions
Power voltage
Medium consumption
Temperature of use
Camera
White
Blue
3
2. Align the license plate to the installation location
4. Adjust up and down angles of the camera
If you install the camera behind the car,
it is not necessary to cut the white wire.
If you install the camera in front of your
car, you need to cut the white wire to
reflect the image to the monitor correctly.
Cut the blue wire if you do not want the
markers to be displayed on the monitor.
Do not cut the blue wire if you want the
markers to be displayed on the monitor.
7070
800 x 533 px
0.05 Lux
+50dB
1.0Vp-p/75 (Ω)
IP68
Colorful rear view guiding lines
9 - 16V
120mA
-26°C ~ + 60°C
EN