Setting Up Your Roo; Power On Your Roo - Hubble Roo Mode D'emploi

2. Setting up your Roo

• Charge the Roo acoustic fetal heart rate monitor with the provided USB
power cable in the USB socket under the rubber lid.
• It is recommended to charge at least 16 hours before initial use.
• When the battery power is too low, the LED indicator will flashed white
slowly for few seconds and turn off. The App will show not paired.
Note:
Only use the power adapter provided.
2.1

Power On your Roo

• Power On - Short press the power button at front of the ROO, the LED
indicator will flash white until paired with mobile.
• Power Off - Press and Hold the power button over 10 seconds, the
LED indicator will be go off.
Setting up your Roo 7