Marquant 014439 Mode D'emploi page 41

Reconnect (RE-CON)
Setting the clock
(CLOCK SET)
CLOCK FORMAT
Button/function switch
tone (BEEP TONE)
RADIO
Search for stations
1. Press (1) repeatedly to select
frequency band (FM1, FM2, FM3, AM1
(MW1) or AM2 (MW2).
2. Press
FIG. 9
Save stations (preset)
1. Press and hold the
about 2 seconds to save the station in the
station memory.
2. Tap the button
saved station.
PLAYBACK FROM USB OR SD
MEMORY
1. Press to pause or resume playback.
2. Press once for random playback of single
tracks, press twice for random playback of
all files.
3. Press to switch track. Press and hold the
button to fast forward or back.
4. Press once to repeat a track, press twice to
repeat all.
5. Press to go to next or previous file.
FIG. 10
After completing
Bluetooth pairing,
Bluetooth devices can
be disconnected and
reconnected.
Setting the time in hours
and minutes.
Show in 12- or 24-hour
format.
Activation and deactivation
of button tone.
to search for a station.
button for
to set the
Playback from USB device
1. Move cover over USB port
(marked ) to left.
2. Connect the USB device to the USB port.
Playback from the USB device starts
automatically.
FIG. 11
Playback from SD memory card
Insert the SD card in the SD card slot. Playback
from the SD card starts automatically.
PLAYBACK FROM OTHER EXTERNAL
DEVICES
1. Press the SRC button to select AUDIO IN
mode.
2. Switch on the external device and start
playback.
FIG. 12
NOTE:
Cable (A) with 3.5 mm phone jack sold
separately.
Bluetooth mode
Calls can be made and answered through
the product with a Bluetooth phone. It is also
possible to listen to music from Bluetooth
devices.
1. Press to switch to Bluetooth mode
(BT AUDIO).
2. Press to answer call.
3. Press and hold the button to reconnect call
from speaker to phone.
4. Press to decline/end call.
FIG. 13
EN
41