Publicité
DK
Power Pack 36-982 / 36-984
Monterings- og betjeningsvejledning
1. Anvendelsesområde.
Power Pack 36-982 / 36-984 er beregnet til
montering i tavle på DIN skinne.
Hertil hører Bevægelsessensor 43-2xx DTA som
detekterer tilstedeværelse.
2. Funktion.
Power Pack er en stabiliseret jævnstrøms-forsyning
med indbygget relæfunktion.
Power Pack er konstrueret til sammenkobling med
en intelligent Sensor med en NPN- eller PNP-udgang.
3. Installation.
Montering.
Tilslutnings diagram Fig. 1 og 2.
For konstant lys kan afbryder / relæ indsættes,
som vist.
Ledningsdimension:
4 x 0,75 ..................................... max. 100 m
2 x2 x ø 1,0 mm ......................... max. 100 m
2 x2 x ø 0,8 mm ......................... max. 50 m
2 x2 x ø 0,6 mm ......................... max. 25 m
2 x2 x ø 0,4 mm ......................... max. 15 m
4. Teknisk data.
Indgang:
Forsyningsspænding ................. 230 V ± 10% 50Hz
Effektforbrug .............................. 4W
Effekttab (inkl. egetforbrug) ....... 6W
Udgang:
Relækontakt ................................ NO, µ 10 A
Belastning
Glødelamper ............................ 2300 W
Lysrør ukompenseret ............. 1200 VA
Halogenglødelamper ............... 500 W
Max. kapacitet ......................... 140µF
Sparelamper ............................ 58 stk. (18W)
Max. indkoblings Peak ............ 165 A / 20 m sek.
Sekundær:
Sekundærspænding ................... 24V DC ±10%
Rippel .......................................... max. 0,5Vpp
Belastning ................................... max. 40mA
(ikke kortslutnings
sikker)
36-982 NPN Relæ ON ................. Klemme 3 til 2 (-)
Low level 0-2V /
max. 20mA
36-984 PNP Relæ ON ................. Klemme 3 til 1 (+)
High level 20-24V /
max. 1mA
Performance:
Kapslingsgrad ............................. IP 20
Isolationsklasse .......................... Klasse II produkt
Omgivelsestemperatur ............... -10°C ... +50°C
Godkendelser:
CE iht. .......................................... EN 60669-2-1
5. Tilbehør.
Bevægelsessensor .................... 43-215 / 43-225
GB
Power Pack 36-982/36-984
Fitting and operating instructions
1. Areas of application.
Power Pack 36-982 / 36-984 is designed for fitting
in boards on DIN rails.
It includes the 43-2xx DTA Motion Sensor, which
detects human presence.
2. Function.
Power Pack is a stabilised direct current supply
with an in-built relay function.
Power Pack is designed for connection with an
intelligent Sensor with an NPN or PNP output.
3. Installation.
Fitting.
Connection diagram Figs. 1 and 2
If constant light is required, a switch/relay can be
installed as shown.
Cable dimension:
4 x 0.75 ..................................... max. 100 m
2 x2 x ø 1.0 mm ......................... max. 100 m
2 x2 x ø 0.8 mm ......................... max. 50 m
2 x2 x ø 0.6 mm ......................... max. 25 m
2 x2 x ø 0.4 mm ......................... max. 15 m
4. Technical data.
Input:
Supply voltage ........................... 230 V ± 10% 50Hz
Power consumption ................... 4W
Power loss (incl. inherent
consumption) .............................. 6W
Output:
Relay contact ............................. NO, µ 10 A
Load
Incandescent lamps ............... 2300 W
Fluorescent tubes,
not compensated ................... 1200 VA
Halogen incandescent lamps 500 W
Max. capacity ......................... 140µF
Energy saving lamps .............. 58 pcs. (18W)
Max. starting Peak .................. 165 A/20 m sec.
Secondary:
Secondary voltage .................... 24V DC ±10%
Ripple .......................................... max. 0.5Vpp
Load ............................................ max. 40mA (not
short circuit-proof)
36-982 NPN Relay ON ................ Terminal 3 to 2 (-)
Low level 0-2V /
max. 20mA
36-984 PNP Relay ON ................ Terminal 3 to 1 (+)
High level 20-24V /
max. 1mA
Performance:
Protection class ......................... IP 20
Insulation class .......................... Class II product
Ambient temperature ................. -10°C ... +50°C
Approvals:
CE according to ......................... EN 60669-2-1
5. Accessories.
Motion sensor ............................. 43-215 / 43-225
2(3)
Publicité
