Publicité
Les langues disponibles
Les langues disponibles
Operation
Greenlee / A Textron Company
Find Quality Products Online at:
using this unit near energized
could result in severe injury or death.
Do not hold hose or couplers
while the hydraulic system is
pressurized.
Depressurize the hydraulic system
before servicing.
Oil under pressure easily punctures
grene or death. If you are injured by
immediately.
or servicing this tool.
result in serious eye injury from
flying debris or hydraulic oil.
GlobalTestSupply
www.
may fail under pressure.
injury or death.
Valve and other components may be
could result in severe injury.
Note: Maintain proper footing and balance while using
the tool. Do not over-reach. Unsuitable footing and
balance may not allow counteracting normal or unex-
pected movement of the tool.
Note: Allow the power source to run for a few
minutes to warm the hydraulic fluid.
2. Position the tool in the appropriate location or
position.
Notes:
When the hydraulic pressure reaches 207 bar to
276 bar (3000 psi to 4000 psi), you may release
the lever and it will stay in the ADVANCE position.
The tool will continue to advance until the intensi-
fier reaches 700 bar (10,000 psi).
You may stop the tool at any time by pressing the
lever to NEUTRAL.
to reduce heat and wear on tool components.
9
.com
sales@GlobalTestSupply.com
Publicité
