Textron GREENLEE PVA0021 Manuel De L'utilisateur page 11

Troubleshooting
Problem
Tool does not operate.
Tool operates slowly or
erratically.
Tool feels hot.
Greenlee / A Textron Company
Find Quality Products Online at:
Probable Cause
Improper power source.
Incorrect hydraulic fluid viscosity.
Power source not adjusted correctly.
Incorrect hydraulic fluid viscosity.
Incorrect hydraulic fluid viscosity.
11
GlobalTestSupply
www.
ing table in this manual. If the problem is in the power
source instruction manual.
Probable Remedy
Verify that the power source meets
section.
tently to reduce the warming time.
Refer to the power source operator's
correspond with the tool.
Refer to the power source manufac
turer's instructions for removing air from
the system.
section.
section.
Refer to the power source owner's
manual for procedure to replace
.com
sales@GlobalTestSupply.com