ECS Electronics FI-004-BB Instructions De Montage page 6

© ECS 1999 FI-004-BB-E
5. Connecting the rear fog light at the left rear light: see figure 2
A
Lights
fig. 2
*Grey (Wire-kit)
6. Put the 8-pole connector of the wiring harness in the supplied module.
Fit the module with the supplied adhesive foam at the lefthand side against the back of the boot.
7. Lead the supplied orange wire along the left side through the interior in the boot.
Careful. Sharp Parts!
Fit the ringtongue to the + pole. Fit the fuse and cover.
Connect the 1-pole connector of this wire with the 1-pole connector with the orange wire of the wiring harness.
8. Put the supplied relays in the relay sockets of the wiring harness.
Mount the sockets with the supplied self tapping screws at the left-hand side in the boot.
9. Reconnect the battery and check all electric functions, with trailer/caravan connected.
Reinstall disassembled parts.
051099L
C
B
*Blue (Wire-kit)
Partno.: FI-004-BB
Switch
rev.0