Hard Head WEED BURNER Traduction Des Instructions D'origine page 20

EN
• Make sure that the gas hose does not
come into contact with hot surfaces – it
can melt and start to leak, which can
cause a fire and/or explosion.
• The product must not be used in enclosed
areas – this could result in personal injury
or death.
• Do not use the product indoors, as this
would risk personal injury or property
damage.
• Do not use the product in an explosive
environment, e.g. near flammable liquids,
gas or dust.
• The gas regulator and gas hose must be
placed so that there is no risk of tripping
over them, or chaffing.
• Turn off the product and wait until it has
cooled before moving it.
GAS
• Only use propane or butane, or a mixture
of these.
• The installation must comply with
applicable regulations for the storage and
handling of LPG.
• Have the gas supplier check the gas
cylinder if it is dented, corroded or
otherwise damaged. Never use gas
cylinders with damaged valve
connections.
• The gas cylinder must be positioned so
that gas cannot accumulate around the
bottle.
• Never connect a non-approved gas
cylinder to the product.
WARNING!
• Accessible parts can be hot.
• Keep children at a safe distance from the
product.
• Keep clothing and furniture away from
the product.
• Wear safety gloves when handling hot
parts.
20
SYMBOLS
Read the operating
instructions before use.
Approved in accordance with
the relevant directives.
Only intended to be used
outdoors.
Hot surfaces.
Risk of personal injury.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Gas hose 1.4 m approved as per ISO 3821
Gas cylinder
Gas regulator sold separately. Gas cylinder sold
separately.
DESCRIPTION
1. Burner handle
2. Igniter
3. Nozzle
4. Knob to adjust flame
5. Hose coupling
FIG. 1
P11/PC10