Power Fist 8347676 Manuel Du Propriétaire page 9

8347676
DC CURRENT ACCURACY
Range Resolution
200µA 0.1µA
2000µA 1µA
20mA 10µA
200mA 100µA
Overload Protection: Ceramic Tube Fuse: 250mA/250V, Fast Action
Max. Test Voltage Drop: 200mV
MEASURING RESISTANCE
NOTE: Before measuring in-circuit resistance, make sure that all power to the circuit has been turned off and all
capacitors are fully discharged.
1. Connect the black test lead to COM Jack and the red test lead to mA/Ω Jack.
2. Set the range switch to desired Ω range.
3. Connect the test leads across the load to be measured.
4. Read the reading on the display.
The multimeter may take longer to stabilize a reading when the resistance measurement is > 1 MΩ. This is normal
for high resistance measurements.
1 is displayed as an overrange indication when the input is not connected.
RESISTANCE ACCURACY
Range Resolution
200Ω 0.10Ω
2,000Ω 1Ω
20kΩ 10Ω
200kΩ 100Ω
2,000kΩ 1kΩ
20MΩ 10kΩ
Max. Open Circuit Voltage: approx. 2.8V
For technical questions call: 1-800-665-8685
Digital Multimeter
Accuracy
± (1.0%+5)
± (1.2%+5)
Accuracy
±(1.0% +5)
±(0.8% +5)
±(1.2% +5)
±(1.2% +10)
V 2.0
9