Set Security Code; Remote Message Retrieval - Serene VM-150 Guide D'utilisation

press "STOP" to end. The display will now show
you have an added new message.
Selecting a Language:
The VM-150 announces all voice prompts in 3 languages--
English (Default), French & Spanish. If you like to select
these voice prompts in French or Spanish, follow these
steps:
1. While in the standby mode, press and hold "VOL
+" for 3 seconds until it announces "French is
selected" (in French).
2. To select Spanish , repeat step 1 until it announces
"Spanish is selected" (in Spanish).
3. To select English, repeat step 1 again until it
announces "English has been selected"

Set Security Code:

The factory default security code is 0000, to overwrite and
set your own security code, follow these steps:
1. While in standby mode, press "CODE" key once,
the machine will then announce your current code
"Your security code is 0000.
press and hold "CODE" key for 3 seconds until it
announces "Security Code setting, the first digit,
0". Press "Vol+ or Vol- " keys to select the number
(shown on the display) you want. Press the "CODE"
key to confirm.
2. The machine announces; "the second digit, 0".
Press again the "VOL+" or "VOL-" key to choose a
number as the second digit, then press "CODE" key
to confirm.
3. Repeat the above steps for the 3rd and 4th digits.
4. After confirming the 4th digit of the new security
code, the machine will instantly announce the new
security code; i.e. "Your security code is XXXX" and
returns to standby mode.
Note: During security code setting, if no key is
input within 8 seconds, the set up procedure will be
abandoned.

Remote message retrieval:

1. Call the number where you have your VM-150. Wait for
English