Profile 423000078 Mode D'emploi page 16

OPERATING THE HEATING CONTROL SET WITH A QNECT SMART PLUG (OPTION)
How do I add the thermostat head to my Qnect app and Smart plug?
Notice!
The smart thermostat head can be linked to up to 3 external devices. When the memory is full, (FULL) appears on
the display.
- Open the Qnect app on your Smartphone.
- Keep the Menu button pressed until 'Pro' appears on the display.
- Choose 'rFS' by turning the dial button.
Notice!
Make sure that you choose 'rFS' and not 'rES'. When you chose 'rES' and follow
the steps below, you reset the smart thermostat head to the factory setting
- Press the OK button.
- Follow the steps in your Qnect Smart Plug manual to couple the thermostat head.
How do I enable or disable the thermostat head?
On the RF screen of the Qnect app select your thermostat head. A menu appears. Perform one of the following
actions:
a. Press the "HIGH" icon to connect the thermostat head to the high adjusted temperature.
b. Press the "LOW" icon to connect the thermostat head to the low adjusted temperature.
MAINTENANCE
The product is maintenance-free, so do not open it. The warranty shall lapse if you open the product. Check once a
month whether the fixing ring is properly fixed. Bolt the fixing ring tight if it is loose. Replace the batteries when
the battery indicator begins to flash.
Notice!
The memory of the product is saved for 1 minute only.
RESETTING TO FACTORY SETTINGS
- Keep the Menu button pressed until 'Pro' appears on the display.
- Choose 'rES' by turning the dial button.
- Press the OK button. 'rES' flashes on the display.
- Press OK to reset