Profile 423000078 Mode D'emploi page 11

FIRST USE
Placing the batteries
- Slide open the battery lid of the product.
- Insert 2 AA batteries (not included). Note the +
and - polarity!
- Slide close the battery lid of the product.
- Activate the battery by pulling the plastic tab
from the battery compartment. This is only
necessary when used the first time.
Set the date and time
- Turn the dial button to set the year.
- Press OK to confirm. On the display the month is flashing.
- Turn the dial button to set the month.
- Press OK to confirm. On the display the day is flashing.
- Turn the dial button to set the day.
- Press OK to confirm. On the display the hour is flashing.
- Turn the dial button to set the hour.
- Press OK to confirm. The minutes are flashing on the display.
- Turn the dial button to set the minutes.
- Press OK to confirm.
- The valve turns in the product and 'ins' is shown on the display. The product is now ready
- to be mounted on the radiator.
Notice!
Do not press OK again before the product is mounted on a heater. When you wait too long with the setting of
the date or the time, the product takes it for granted that the settings have been completed. The valve turns
again in the product.
Overview display
1 RF indicator
2 Day
3 Time
4 Date
5 Holiday position
6 Manual settings
7 Automatic settings
8 Indicator low '(' and high '✳' temp.
9 The set temperature
10 Window open
11 Battery empty indicator
12 Programme indicator
13 Time indicator
1
3
8
5
6
7
10
11
12
13
EN
2
4
9